| 1. Remove intermediate and back sections of an exhaust system. |
| 2. Remove the balance weight of ropes of the hand brake. |
| 3. Remove supports of brakes. |
| 4. Remove ABS sensors. |
| 5. Disconnect the driveshaft from a flange of the main transfer. |
| 6. Establish a thick board under levers of a suspension bracket and establish under the board center a jack. |
| 7. Turn off the bolts, fixing arms of the main transfer to a body. |
| 8. Turn off bolts of the bottom fastenings of shock-absorbers. |
| 9. Remove suspension bracket and laying springs. |
|
10. Turn off three fixing bolts (And) and the central bolt (In) forward fastening of a cross-piece of a suspension bracket and remove a back suspension bracket. |