Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Bottom lever of a forward suspension bracket
   12.5. Spherical hinge of the bottom lever of a forward suspension bracket
   12.6. Stabilizer of cross-section stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross-section stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12.10. Cross-piece of a forward suspension bracket
   12.11. Shock-absorber of a back suspension bracket
   12.12. Lever of a back suspension bracket
   12.13. Springs of a back suspension bracket
   12.14. Stabilizer of cross-section stability of a back suspension bracket
   12.15. Cross-section drafts of a back suspension bracket
   12.16. System of adjustment of height of a back suspension bracket
   12.17. Back suspension bracket
   12.18. Cross-piece of a back suspension bracket
   12.19. Fastenings of a cross-piece of a back suspension bracket
   12.20. Nave and bearings of a back wheel
   12.21. Steering wheel
   12.22. Steering column
   12.23. Lock steering column / lock of ignition
   12.24. Steering mechanism
   12.25. Steering drafts
   12.26. Steering soshka
   12.27. Pump of system of the hydraulic booster of a steering
   12.28. Adjustment of wheels and corners of turns
+ 13. Body
+ 14. Body electric equipment



12.4. Bottom lever of a forward suspension bracket

Removal

PERFORMANCE ORDER
1. Remove the corresponding forward wheel.
2. Turn off a coupling bolt and lower the suspension bracket lever down, having disconnected the spherical hinge from a rotary pin.
3. Turn off fixing bolts and remove the suspension bracket lever from the car.
4. Check a condition of plugs of fastenings and replace them if it is necessary.

Installation

PERFORMANCE ORDER
1. Establish the suspension bracket lever on a place and acquire fixing bolts.
2. Establish the lever horizontally and twirl fixing nuts and bolts till the demanded moment of an inhaling.
3. Further installation is carried out to sequences, return to removal.