Opel Omega

since 1993-1999 of release

Repair and car operation

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
- 8. Coupling
   8.1. Technical characteristics
   8.2. Hydraulic system of a drive of switching off of coupling
   8.3. Main cylinder
   8.4. Working cylinder
   8.5. Coupling pedal
   8.6. Coupling disks
   8.7. Main malfunctions, their reasons and elimination methods
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment

8.2. Hydraulic system of a drive of switching off of coupling



At carrying out pumping use only new hydraulic liquid.

Before the beginning of pumping check all tubes and reliability of connections.

Arrangement of the valve of pumping

The valve of pumping is located on the right side of a transmission.

Main method of pumping

1. Fill a tank with new hydraulic liquid.
2. Remove a cap from the pumping valve. Put on a hose the valve and lower the second end of a hose in hydraulic liquid.
3. Ask the assistant to squeeze out a coupling pedal. Open the valve of pumping and merge liquid. Close the valve. Release a coupling pedal.
4. Repeat this operation while in following liquid there will be no air vials.

Pumping with set use with the unilateral valve

1. In a rubber tube of such set the unilateral valve preventing hit of air and old hydraulic liquid back in system is established. The set also can include capacity for collecting old hydraulic liquid.
2. After set connection to the valve of pumping open the valve. Smoothly squeeze out a pedal of coupling and slowly release it. Repeat this operation while all air will not be removed from hydraulic system.

Pumping with set use for pumping under pressure

Having connected a set for pumping under pressure to a tank of hydraulic liquid, for pumping of system it is rather simple to open the pumping valve for a slitiya of old hydraulic liquid and production of air.

All methods

On termination of pumping wash away the spilled hydraulic liquid, reliably twirl the valve of pumping and establish on it a cap. Once again check level of hydraulic liquid.